We are technical experts in special print plate making.

  • Tokuabe(Thailand)
  • instagram
  • facebook
+81-3-3643-5311
ContactUS

Hot Stamping Die

TOP > Product introduction > Hot Stamping Die

Hot stamping on complicated curved surface? Please leave it to us!

 

⑦ホットスタンプサンプル_小.jpg⑥ホットスタンプ資材_小.jpgD850-16 - 2_小.jpgD850-12_小.jpgIMG_1133 2.jpg

We are manufacturing high quality and accurate hot stamp die for the curved surface of your products. Our hot stamp die can make them look more metallic and brilliant.

Absolutely, we can make hot stamp die from 3D data. Furthermore, we have 3D scanner, so it’s possible to scan your products to digitize and make it based on the data.

We have expertise so that our hot stamp leads productivity.

 

Hot Stamping on curved surface is necessary that hot stamp die and jig is suitable as one set. The mismatch of them affects the hot stamp quality and productivity badly.

 Therefore, we strongly recommend you to order us to manufacture hot stamp die and jig together to keep consistent.

   

For hot stamping on blowing bottle, we can manufacture metal jig is combined with hot stamp die. The metal die is made following the bottle shape. It will also improve the productivity.

 

 

 

 

 

 

Metal die

Metal die can be used on paper, plastic, PP, PE, and so on.

It is also available to hot stamp for decorating on complicated shape products and embossing.

Our craftsman has high expertise manufactures high accurate metal die to meet customer’s demands.

- Material  Iron, Brass, and so on

- Features Our dies are available to various shape products.

 Metal die can be hardened and surface coated.

 Embossing processing can be done by it.

 

 

 

Rubber die

Hot stamp is used widely for plastic molding closely related to everyday life, home appliances and so on.

The silicone rubber we are using for the rubber die has features are good elasticity, heat resistance, and heat conduction.

The silicone rubber elasticity can improve failure rate by variation in molding shapes. It can lead to brilliant and beautiful finished on both of flat and curved surfaces by hot stamp.

[ Engraved Metal Mold for Rubber die ]

- Features  ・Manufacturing mold by engraving.

  Both of Flat and Curved rubber die are available.

  You can request some step engraving reliefs.

  The silicone rubber elasticity will follow the variation in molding process.

  It will improve the failure rate.

  You can choose rubber thickness, base material, and the size.

  Rubber hardness : 60°, 70°, 80°, 90°, 95°

[ E-Rubber mold for rubber die ]

- Features  ・Manufacturing mold by etching.

  ・It’s available to only flat rubber die and one step relief.

  ・E-rubber is reasonable and short lead time comparing with engraved metal mold for rubber die.

  ・The maximum size : 280×420㎜

  ・Rubber hardness : 60°, 70°, 80°, 90°, 95°

 

 

Flat Rubber

Flat Rubber

Hot stamp is used widely for plastic molding closely related to everyday life, home appliances and so on.

The silicone rubber we are using for the rubber die has features are good elasticity, heat resistance, and heat conduction.

The silicone rubber elasticity can improve failure rate by variation in molding shapes.

It can lead to brilliant and beautiful finished on both of flat and curved surfaces by hot stamp.

Rubber Roll

・Rubber lining, Regrinding, R shaped processing, and Forming line on rubber by grind are available.

・Please feel free to contact us, if the size you want is not on the list.

 

20.03.17_ラバーロール 硬度表_英語.jpg
 

Rubber sheet

The list is standard size, so we have other thickness and size.

It is possible to cut it in accordance with your request size.

- Standard size  300㎜×600㎜,  400㎜×400㎜

- Rubber hardness  60°, 70°, 80°, 90°

- MOQ 1 sheet is available.

20.03.17_平ラバー 300 600 硬度表_英語.jpg

 

20.03.17_平ラバー 400 400 硬度表_英語.jpg

 

 

 

Contact Us

Any further inquiries regarding our product, technology and other information, please contact from here.

+81-3-3643-5311
Contact Us